At the sensor + test 2011 from 7-9 June 2011 in Nuremberg the new 8-channel is classed in on the stand by MicroControl in Hall 11 (booth 411) temperature transducer. At the sensor + test 2011 from 7-9 June 2011 in Nuremberg the new 8-channel is classed in on the stand by MicroControl in Hall 11 (booth 411) temperature transducer. The transmitter CAN.8.ti-SNAP has 8 inputs for thermocouple or Pt100 sensor. The integrated CAN interface dominates the Protokolle CANopen and J1939, bit rate and node address can be mounted with switch in the device or LSS services. The setting of sensor types and configuration of each channel is carried out via the fieldbus. The device features an internal cold junction compensation when measuring thermocouples. With a width of only 22.5 mm, the new temperature transducer requires very little space in the control cabinet and can be combined with all modules of MicroControl CAN SNAP any series on the backplane bus. For Users who are beschaftiGen for the first time with the networking via CAN-bus, offers various SEMinare MicroControl. Further services, such as BerTung in the concept phase, hardware and software development as well as customer-specific adjustments also include the range of services.